The order is expected to be delivered within 3 to 4 weeks, thank you for your patience!(Except in the United States）
Lifetime service support
Hyper PLA Plus Filament 1.75mm 1KG
- Email：vincent@ujoybio3d.com
-
WhatsApp：+8619129515440
UJOYBIO3D Hyper PLA Plus series of 3D printing filament, is the upgraded version of PLA+ 2.0, very excellent PLA+ material with super high toughness, highly environmentally friendly 3D printing material, has a high precision diameter of 1.75mm (±0.02mm), high purity without impurities, does not clog the nozzle, is compatible with most of the FDM 3D printers in the market, and is more durable than traditional PLA+ filament increases easy mechanical properties, the finished print is smooth and delicate, no warping, strong impact resistance, high strength and durability, it is the strongest environmentally friendly 3D printing filament.
UJOYBIO3D Hyper PLA Plus Printing Filament Features
1.75mm high-precision PLA+ filament with smooth feeding : UJOYBIO3D Hyper PLA+ filament has a high-precision diameter of 1.75mm with a tolerance of ±0.02mm. High-precision diameter, high-purity wire, no nozzle clogging, and wide compatibility with almost all 1.75mm FDM 3D printers, no need to adjust the printer settings.
Good Winding and Minimum Tangling : UJOYBIO3D's PLA+ series filaments utilize a high-precision, fully automated winding process. The neat winding of the filament minimizes tangling and knotting during the printing process, allowing for smoother printing, which saves your time and improves print quality.
Superior Strength and Toughness : Hyper PLA+ series filaments have 60% higher overall mechanical properties and 150% higher impact strength than marketed PLA+. As a result, this filament has a low shrinkage rate, no warping problems, a smoother and finer surface of the finished print, clearer edges, superb bonding, tensile and flexural strengths, so the finished print is very tough, solid and durable.
500mm/s high speed printing : UJOYBIO3D PLA+ filament is designed for high-speed 3D printing and supports printing speeds of up to 500 mm/s. Even at such high speeds, its excellent layer adhesion ensures that your prints are structurally stable and rich in detail.
Environmentally Friendly Materials : UJOYBIO3D Hyper PLA+ Series filament is a plant-based, biodegradable plastic that is safe and environmentally friendly. It is non-toxic and has no irritating odor, which will be more friendly to educational environments such as homes and schools.
| Tensile Strength(Z) | 66.1MPA | Density | 1.32 G/CM3 |
| Tensile Modulus(Z) | 2630MPA | Melt Flow Rate* | 4-7 G/10MIN |
| Elongation at Break | 2% | Heat Distortion Tempperature | 55℃ |
| Flexural Strength(X-Y) | 70.7MPA | Printing Temperature | 200-220℃ |
| Flexural Modulus(X-Y) | 2630MPA | Bed Temperature | N0/40-60℃ |
| Charpy Impact Strength(X-Y) | 14KJ/m2 | Printing Speed | 300-500mm/s |
| IZOD Impact Strength(X-Y) | 13KJ/m2 | Recommended Printing Temperature | 220℃ |
| Bending strength | 77.7MPA | Bending modulus | 2009MPA |
The melt flow rate was tested at 190℃, 2.16kg。
Packaging
All UJOYBIO3D Hyper PLA+ filaments are vacuum-dried and sealed in a box.
FAQs
What is the estimated delivery time for international orders?
1、In-Stock Products: Delivered within 3-7 business days after shipment.
2、Pre-Order Products: Shipped according to the estimated delivery time shown on the product page. Delivery will take 3-7 business days after shipment.
