UJOYBIO PETG 3D Printer Filament 1.75 mm 1 KG – High-Strength

This is the first PETG I��ve ever been able to print! I have learned that even brand new filament needs to be dried. I printed the temperature calibration tower at 26% RH. This filament printed buttery smooth on my Anycubic Kobra S1 with a custom PETG profile my friend sent me.

This was my first time using this brand of filament, and I am very impressed. Prints are perfect every time. The filament comes vacuum sealed with a desecate pack. It comes neatly wound with no tangles. Prints are perfect, and the bed adhesion is great.

The first print I did was straight out of the bag and you could tell that the filament would have benefited from going in the dryer first. The second print I used a roll that I had dried for a few hours, and while the print started off clean and smooth, since I left the roll out as it printed, it started taking in water and would leave pockmarks. The colors are nice and vibrant, and like I said PETG tends to print shiny and this one is no different. I like that I didn't really have to fuss and figure out the best print settings, and that the filament was clean and didn't cause issues in my nozzle. This filament just worked. I wish it was high speed PETG, but it worked well enough.

This filament prints very smooth with no stringing. Prints come out even and flawless without lines. I printed at a temperature of 255C and a bed temperature of 80C. It adhered to the bed perfect with no glue. The reels are plastic, and they roll great with no friction in my dryers.

I highly recommend this brand .